When booting to the USB/SD card by holding the Option key during start-up, the drives will mount with their new names making them easier to identify.
Go through each to identify which version of OS X is contained, then simply rename it to a common name, such as 10.7 for the Lion installer 10.8 for Mountain Lion, etc. The utility is free and available in English and Chinese. To resolve this, once the entire copy process has completed for all versions of OS X, the Finder will mount them all on the Desktop. Burn Card Maker is a portable software for creating bootable SD cards for Android boxes. While thoughtful, if working with multiple partitions, each will have the same name making them indistinguishable from the others.
Tip: By default, Disk Utility names the partition identical to the source 'Mac OS X Install DVD' in my case. The copying process (steps #9-12) will now need to be repeated once for each version of OS X being stored.If housing 10.5/10.6/10.7/10.8 8GB x 4 versions of OS X = 32GB total 4 partitions will then need to be created). Instead of selecting '1' partition in step #4, you'll be selecting a number equal to the number of versions of OS X you'll be copying over.
The steps are identical to the Creating a USB Installer for Apple OS X 10.7-10.8 tutorial listed above, except for two key differences. This means about 8GB of storage space per version of OS X. And it worked! To achieve this, you'll want to have a USB/SD card capable of holding all the OSs on drive. While writing this article, I found myself in a predicament - I only had a 8GB USB drive! But luckily, I found a 16GB drive I'd lent my wife awhile back and decided to try to get the two versions of OS X encountered most frequently (10.7 & 10.8) onto the same 16GB USB drive.
Click on the Restore tab and verify that the Mac OS X Install DVD appears in the Source text box.Launch Disk Utility and click on the OS X Install DVD from the left-hand menu.Insert Apple OS X Install DVD into Optical Drive.The process has not been tested with Restore DVDs and may not yield a reliable, OS X Installer USB. Protect your privacy without losing connection speed with a trustworthy VPN service like IPVanish.*Note: Install DVD must be the original DVD from Apple and not a Restore DVD that came with earlier model Apple computers & laptops.
Now click on the ‘Start’ button to proceed with the update that should last for several minutes. Τhe USB burning tool should automatically detect the Tvbox.Ħ. Use a toothpick to press the recovery button for around 10 seconds and power the device (Please note that in some TVboxes it is located in the AV port and in some others at the bottom).
Make sure that the TVbox is powered off and that you have a USB male to male cable connected to your PC. img firmware for your Amlogic device – make sure it’s the correct firmware to avoid bricking.ĥ. Click on File->Import image and select your specific.
Extract the archive using an application such as 7zip and ”run” setup_v2.0.8.exe file to install the USB Burning Tool.Ĥ. The USB Burning Tool is a Windows application used to flash firmware from a Windows PC to Android devices powered by Amlogic processors.ĭownload Amlogic USB Burning Tool v2.0.8 from hereĢ.